NSN 5305-01-076-8101 · NIIN 010768101 · FSC 5305
NO DASHES 5305010768101
In Stock
SCREW,MACHINE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.432 AND INCHES MAXIMUM 0.442 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.271 AND INCHES MAXIMUM 0.281 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.030 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.0525 AND INCHES MAXIMUM 0.0645 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ASXK | HOLE QUANTITY | 2 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYAU | SCREW MATERIAL | STEEL COMP 1215 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| FEAT | SPECIAL FEATURES | TWO DRILLED HOLES IN HEAD 90.0 DEGREES APART,FROM BEARING SURFACE OF HEAD,ONE HOLE IS LOCATED 0.125 IN. TO 0.145 IN. THE OTHER 0.060 IN. TO 0.070 IN. |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 456306 | 77445 |