NSN 5305-01-084-7051 · NIIN 010847051 · FSC 5305
NO DASHES 5305010847051
In Stock
SETSCREW
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.104 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.104 |
| AASK | HEAD STYLE | |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.051 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.062 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.013 AND INCHES MAXIMUM 0.014 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 53.0 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 4 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-200 | 81348 |
| FFS103TYPE4STYLE4 | 81348 |
| MS21342-112 | 96906 |
Supersedes
This item replaces cancelled NIIN 006881464. An older drawing citing one of those numbers resolves here.