NSN 5305-01-101-9437 · NIIN 011019437 · FSC 5305
NO DASHES 5305011019437
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.287 AND INCHES MAXIMUM 0.337 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.2966 AND INCHES MAXIMUM 0.3016 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3930AS1210-3-3-5 | 30003 |
| HT4041-3-3-5 | 56878 |
| 3M707-3-3-5 | 58998 |
| WC4041-3-3-5 | 60516 |
| 11873-3-3-5 | 59563 |
| HT4041-3-3-5 | 73197 |
| 3M707-3-3-5 | 76301 |
| HT4041-3-3-5 | 80539 |
| HT4041-3-3-5 | 92215 |
| HT4041-3-3-5 | 97928 |
| 10115011 | A486G |
| HT4041-3-3-5 | L4528 |
| HT4041-3-3-5 | K5673 |
| HT4041-3-3-5 | 06950 |
| HT4041-3-3-5 | 0PTK6 |
| HT4041-3-3-5 | 17446 |