NSN 5305-01-117-5908 · NIIN 011175908 · FSC 5305
NO DASHES 5305011175908
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.282 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.326 AND INCHES MAXIMUM 0.344 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.087 AND INCHES MAXIMUM 0.097 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-495 OR MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-13924 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6430-08-06 | 27914 |
| 6430-0806 | 27914 |
| 6430-0806 | 97896 |
Supersedes
This item replaces cancelled NIIN 012865978. An older drawing citing one of those numbers resolves here.