NSN 5305-01-126-5265 · NIIN 011265265 · FSC 5305
NO DASHES 5305011265265
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.366 AND INCHES MAXIMUM 0.416 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.376 AND INCHES MAXIMUM 3.406 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.752 AND INCHES MAXIMUM 0.762 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.990 AND INCHES MAXIMUM 3.010 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.253 AND INCHES MAXIMUM 3.293 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4049-6D48 | 56878 |
| WC4049-6D48 | 60516 |
| ST3M714-6D48 | 58998 |
| HT4049-6D48 | 73197 |
| ST3M714-6D48 | 76301 |
| HT4049-6D48 | 80539 |
| HT4049-6D48 | 92215 |
| HT4049-6D48 | 97928 |
| 10115143 | A486G |
| HT4049-6D48 | L4528 |
| HT4049-6D48 | 06950 |
| HT4049-6D48 | 17446 |