NSN 5305-01-131-2200 · NIIN 011312200 · FSC 5305
NO DASHES 5305011312200
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.287 AND INCHES MAXIMUM 0.337 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.577 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.395 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.015 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,TY D,FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4041-4-4-5 | 56878 |
| 3M707-4-4-5 | 56878 |
| WC4041-4-4-5 | 60516 |
| 11873-4-4-5 | 59563 |
| 3M707-4-4-5 | 58998 |
| HT4041-4-4-5 | 73197 |
| 3M707-4-4-5 | 76301 |
| HT4041-4-4-5 | 80539 |
| HT4041-4-4-5 | 92215 |
| 3M707-4-4-5 | 92215 |
| HT4041-4-4-5 | 97928 |
| HT4041-4-4-5 | 06950 |
| HT4041-4-4-5 | 0PTK6 |
| HT4041-4-4-5 | 17446 |