NSN 5305-01-131-2214 · NIIN 011312214 · FSC 5305
NO DASHES 5305011312214
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.380 AND INCHES MAXIMUM 0.447 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.562 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3765 AND INCHES MAXIMUM 0.3813 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.0439 AND INCHES MAXIMUM 0.0459 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT271-3-2 | 73197 |
| ST3M430V3-2D | 76301 |
| 110179-3-2 | 80539 |
| HT8137-3-2 | 92215 |
| BM33024V3-2 | 97928 |
| 10115273 | A486G |
| HT271-3-2 | L4528 |
| 110179-3-2 | K5673 |
| HT8137-3-2 | 06950 |
| BM33024V3-2 | 17446 |