NSN 5305-01-132-0513 · NIIN 011320513 · FSC 5305
NO DASHES 5305011320513
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: AIRCRAFT, HORNET F/A-18
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.515 AND INCHES MAXIMUM 1.562 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.502 AND INCHES MAXIMUM 0.507 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.072 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FURNISH WITH ONE O RING |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT271A4-17 | 73197 |
| ST3M430V4-17AS | 76301 |
| 110179-4-17AS | 80539 |
| HT8137-4-17AS | 92215 |
| ST3M430V4-17AS | 92215 |
| BM33024V4-17U | 97928 |
| 10115304 | A486G |
| 110179-4-17AS | K5673 |
| HT271A4-17 | L4528 |
| HT8137-4-17AS | 06950 |
| BM33024V4-17U | 17446 |