NSN 5305-01-138-2658 · NIIN 011382658 · FSC 5305
NO DASHES 5305011382658
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.450 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.972 AND INCHES MAXIMUM 1.002 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.473 AND INCHES MAXIMUM 0.492 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.162 AND INCHES MAXIMUM 0.175 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CYAU | SCREW MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| CYBA | SCREW SURFACE TREATMENT | ALUMINUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 TYE 2CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M893-4-9 | 76301 |
| ST3M893-4-9 | 76301 |
| SC2163-4-9 | 96039 |
| A532-4-9 | 97928 |
| SC2163-4-9 | 06950 |
| 3M893-4-9 | 06725 |
| AIC940-4-9 | 06725 |
| 3M893-4-9 | 06950 |
| 3M893-4-9 | 0ZC92 |
| A532-4-9 | 17446 |
| 3M893-4-9 | 17446 |