NSN 5305-01-146-6126 · NIIN 011466126 · FSC 5305
NO DASHES 5305011466126
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.519 AND INCHES MAXIMUM 0.594 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.078 AND INCHES MAXIMUM 1.123 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.510 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 4037 OR STEEL COMP 8630 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE A-S 6300 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 |
| CYAZ | HEAD SURFACE TREATMENT | PAINT |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBD | HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MFR REF SINGLE TREATMENT RESPONSE LAC C-156-F,FSC- 36659 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN821-4 | 77445 |
| LS9365-517-4-10 | 98897 |