NSN 5305-01-156-5117 · NIIN 011565117 · FSC 5305
NO DASHES 5305011565117
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.079 AND INCHES MAXIMUM 1.109 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.381 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 TYE C FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 TYE2 CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4057-3-11A | 56878 |
| WC4057-3-11 | 60516 |
| ST3M733-3L11 | 58998 |
| HT4057-3-11 | 73197 |
| HT4057-3-11A | 73197 |
| ST3M733-3L11 | 76301 |
| ST3M733-3-11 | 76301 |
| HT4057-3-11A | 80539 |
| HT4057-3-11 | 80539 |
| HT4057-3-11 | 92215 |
| CHT4057-3-11 | 92215 |
| HT4057-3-11 | 97928 |
| HT4057-3-11A | K5673 |
| HT4057-3-11A | L4528 |
| ST3M733-3L11 | 007R1 |
| HT4057-3-11A | 06950 |
| HT4057-3-11A | 0PTK6 |
| HT4057-3-11A | 17446 |