NSN 5305-01-158-7835 · NIIN 011587835 · FSC 5305
NO DASHES 5305011587835
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.323 AND INCHES MAXIMUM 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.698 AND INCHES MAXIMUM 1.745 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.373 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.133 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.042 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.375 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R54520 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GB511J3D22 | 26512 |
| 67077D-3-22 | 56878 |
| HT193LB3H-22 | 73197 |
| 67077D-3-22 | 80539 |
| T151-3D22 | 85495 |
| HT8099-3D22 | 92215 |
| T151-3D22 | 97928 |
| BM21009-3H-22 | 97928 |
| HT193LB3H-22 | L4528 |
| T151-3D22 | 17446 |
| BM21009-3H-22 | 17446 |