SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305011937613
Availability: LimitedAvailability

Screws

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.352 AND INCHES MAXIMUM 0.403
AASB	FASTENER LENGTH	INCHES MINIMUM 1.227 AND INCHES MAXIMUM 1.247
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.704 AND INCHES MAXIMUM 0.762
AAUM	LOCKING FEATURE	GRIP DETENT BALL
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.3737 AND INCHES MAXIMUM 0.3742
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.375
ANEE	GRIP LENGTH	INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.704
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 63000
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 43.0 AND ROCKWELL C MAXIMUM 47.0
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 1.099 AND INCHES MAXIMUM 1.119
CSYM	SURFACE FINISH	GRIP MICROINCHES 32.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.