NSN 5305-01-193-7942 · NIIN 011937942 · FSC 5305
NO DASHES 5305011937942
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 5.000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 6.000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.500 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 1.000 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.375 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.094 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.000 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.750 |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE TREATMENT RESPONSE QQ--416,TYE 2 |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 81984 | 56878 |
| 9338121 | 77595 |
| SK 8172-503 | 77595 |
| 9338121 | 19200 |