NSN 5305-01-201-2238 · NIIN 012012238 · FSC 5305
NO DASHES 5305012012238
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.750 AND INCHES MAXIMUM 1.938 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.906 AND INCHES MAXIMUM 5.000 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.455 AND INCHES MAXIMUM 0.483 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.125 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.092 AND INCHES MAXIMUM 0.100 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 90000 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MAXIMUM 235.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 40000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| FEAT | SPECIAL FEATURES | PROVIDED WITH SNAP RING GROOVE AND GRAPHITE LUBE MIL-L-8937 |
| MATT | MATERIAL | OVERALL STEEL COMP 403 OR STEEL COMP 410 OR STEEL COMP 416 OR STEEL COMP 420 OR STEEL COMP 429 OR STEEL COMP 4340 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440FSE OR STEEL COMP 446 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101141 | 51489 |