NSN 5305-01-201-3330 · NIIN 012013330 · FSC 5305
NO DASHES 5305012013330
In Stock
SCREW,MACHINE
Screws
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS MINIMUM 11.0 AND MILLIMETERS MAXIMUM 12.0 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 12.00 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | MILLIMETERS MINIMUM 5.50 AND MILLIMETERS MAXIMUM 5.80 |
| AASU | HEAD HEIGHT | MILLIMETERS MINIMUM 2.05 AND MILLIMETERS MAXIMUM 2.30 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 3.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQQR | THREAD PITCH IN MILLIMETERS | 0.5 |
| CYAU | SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | M |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 71000-03 | 23386 |
| 511355-14 | 31550 |
| A3013115-14 | 80063 |
| 85SXM3X12 | 15526 |