NSN 5305-01-201-9380 · NIIN 012019380 · FSC 5305
NO DASHES 5305012019380
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.512 AND INCHES MAXIMUM 0.605 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.657 AND INCHES MAXIMUM 0.688 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5737 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3V2114-410C | 1ER65 |
| PBF1068-410C | 27624 |
| A0L4168-410 | 57472 |
| FS2003-3/410C | 58998 |
| 9145-410 | 58251 |
| BCP50003-410C | 62206 |
| 965813-410C | 6F810 |
| 106751-3-410C | 80539 |
| 965813-410C | 82577 |
| E125-410 | 97928 |
| 10113533 | A486G |
| AIC813-3-R11 | 06725 |
| CBS813-3-R11 | 0F620 |
| CBS813-03-R11 | 0F620 |
| E125-410 | 17446 |