NSN 5305-01-202-2681 · NIIN 012022681 · FSC 5305
NO DASHES 5305012022681
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.556 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.954 AND INCHES MAXIMUM 0.984 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.477 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4068-5-7A | 56878 |
| 11883-5L7 | 59563 |
| 3M926-5L7 | 58998 |
| WC4068-5-7 | 60516 |
| HT4068-5-7A | 73197 |
| 3M926-5L7 | 76301 |
| HT4068-5-7A | 80539 |
| HT4068-5-7A | 92215 |
| HT4068-5-7A | 97928 |
| HT4068-5-7A | K5673 |
| HT4068-5-7A | L4528 |
| 3M926-5L7 | 007R1 |
| HT4068-5-7A | 06950 |
| HT4068-5-7A | 17446 |
Supersedes
This item replaces cancelled NIIN 010967351. An older drawing citing one of those numbers resolves here.