NSN 5305-01-219-8718 · NIIN 012198718 · FSC 5305
NO DASHES 5305012198718
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.356 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.628 AND INCHES MAXIMUM 0.658 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MAXIMUM 0.381 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 100.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HS4396-3T5 | 58536 |
| HT295-3-5 | 73197 |
| HT295-3-6 | 73197 |
| HS4396-3T5 | 8V613 |
| HT8163-3-6 | 92215 |
| HT8163-3-5 | 92215 |
| HS4396-3T6 | 8V613 |
| HT295-3-5 | L4528 |
| HS4396-3T5 | 02731 |
| HT8163-3-5 | 06950 |
Supersedes
This item replaces cancelled NIIN 011775842. An older drawing citing one of those numbers resolves here.