NSN 5305-01-231-7419 · NIIN 012317419 · FSC 5305
NO DASHES 5305012317419
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.666 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.314 AND INCHES MAXIMUM 2.344 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.678 AND INCHES MAXIMUM 1.698 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 101.0 |
| FEAT | SPECIAL FEATURES | CETYL ALCOHOL LUBRICATION |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4068-6-27A | 56878 |
| 11883-6L27 | 59563 |
| HT4068-6-27A | 73197 |
| 3M926-6L27 | 73197 |
| 3M926-6L27 | 76301 |
| 3M926 | 76301 |
| 3M926-6L27 | 80539 |
| HT4068-6-27A | 92215 |
| 3M926-6L27 | 92215 |
| HT4068-6-27A | 97928 |
| 3M926-6L27 | K5673 |
| 3M926-6L27 | L4528 |
| HT4068-6-27A | 06950 |
| 3M926-6L27 | 17446 |
| HT4068-6-27A | 17446 |