NSN 5305-01-232-6713 · NIIN 012326713 · FSC 5305
NO DASHES 5305012326713
In Stock
SCREW,EXTERNALLY RELIEVED BODY
Screws
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.467 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.710 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.688 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.830 |
| AAUM | LOCKING FEATURE | GRIP DETENT BALL |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.375 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.308 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES NOMINAL 0.380 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 0.493 AND INCHES MAXIMUM 0.508 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| FEAT | SPECIAL FEATURES | HEAD DESIGN IN THREE SECTION; FROM TOP 0.250 IN. LENGTH,0.688 IN. DIA.,0.770 IN. LENGTH,0.440 IN. DIA.,0.830 IN. LENGTH,0.630 IN. DIA.; POINT SHANK FROM THREADED END,1.750 IN. LENGTH,0.249 IN. MIN. AND 0.250 IN. MAX. DIA.;HOLE IN SHANK,FROM HEAD 1.750 IN. TO CENTER OF HOLE 0.0627 IN. MIN. AND 0.0631 IN. MAX. DIA. SUPPLIED WITH PLUNGER AND PLUG |
| MATT | MATERIAL | SPRING STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPRING ASSN STD SINGLE MATERIAL RESPONSE A-S5643 |
| SFTT | SURFACE TREATMENT | SPRING PASSIVATE |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SPRING FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74B738006-201 | 76301 |
| 123418 | 80539 |
| AS320-201 | 84256 |
| 10113563 | A486G |
Supersedes
This item replaces cancelled NIIN 011506666. An older drawing citing one of those numbers resolves here.