NSN 5305-01-240-2649 · NIIN 012402649 · FSC 5305
NO DASHES 5305012402649
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.554 AND INCHES MAXIMUM 0.604 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.939 AND INCHES MAXIMUM 0.969 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.703 AND INCHES MAXIMUM 0.762 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 24.0 AND ROCKWELL C MAXIMUM 35.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 7479 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1379-0606 | 27624 |
| LE111-0033-0606 | 43999 |
| SII-1088-0606 | 57928 |
| FIT111-0033-0606 | 58998 |
| W111-0033-0606 | 60516 |
| MA2LE133-6-06 | 58845 |
| HR132E6T | 73197 |
| 123181E6T06 | 80539 |
| E033-0606 | 97928 |
| AIC4038E6-06 | 06725 |
| SCI785TE6-06 | 06950 |
| LE111-0033-0606 | 0HL40 |
| E033-0606 | 17446 |