NSN 5305-01-241-0202 · NIIN 012410202 · FSC 5305
NO DASHES 5305012410202
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.265 AND INCHES MAXIMUM 1.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.502 AND INCHES MAXIMUM 0.507 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MAXIMUM 100.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT271-4-13 | 73197 |
| ST3M430V4-13D | 76301 |
| ST3M430V4-130 | 76301 |
| 110179-4-13 | 80539 |
| HT8137-4-13 | 92215 |
| BM33024V4-13 | 97928 |
| HT271-4-13 | L4528 |
| HT8137-4-13 | 06950 |
| ST3M430V4-13D | 0PTK6 |
| BM33024V4-13 | 17446 |