NSN 5305-01-249-0893 · NIIN 012490893 · FSC 5305
NO DASHES 5305012490893
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.329 AND INCHES MAXIMUM 1.359 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.635 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 TYE 2 CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M733-4L-14 | 56878 |
| ST3M733-4L-14 | 60516 |
| ST3M733-4L-14 | 58998 |
| HT4057-4-14A | 73197 |
| ST3M733-4L-14 | 76301 |
| HT4057-4-14A | 80539 |
| HT4057-4-14A | 92215 |
| HT4057-4-14A | 97928 |
| ST3M733-4L-14 | K5673 |
| HT4057-4-14A | L4528 |
| ST3M733-4L14 | 007R1 |
| HT4057-4-14A | 06950 |
| ST3M733-4L-14 | 0PTK6 |
| HT4057-4-14A | 17446 |