NSN 5305-01-253-4860 · NIIN 012534860 · FSC 5305
NO DASHES 5305012534860
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.456 AND INCHES MAXIMUM 0.508 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 7500 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4027-4-6 | 1RC86 |
| ST3M557-4-6 | 1V0G6 |
| HT4027-4-6 | 56878 |
| WC4027-4-6 | 60516 |
| HT4027-4-6 | 58998 |
| HT4027-4-6 | 73197 |
| HT4027-4-6 | 80539 |
| HT4027-4-6 | 92215 |
| HT4027-4-6 | 97928 |
| HT4027-4-6 | L4528 |
| HT4027-4-6 | 06950 |
| HT4027-4-6 | 17446 |