SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305012594062
Availability: LimitedAvailability

Screws

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494
AASB	FASTENER LENGTH	INCHES MINIMUM 1.829 AND INCHES MAXIMUM 1.859
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
ANEE	GRIP LENGTH	INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 125000
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 1.708 AND INCHES MAXIMUM 1.748
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.