NSN 5305-01-259-9764 · NIIN 012599764 · FSC 5305
NO DASHES 5305012599764
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.323 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.6205 AND INCHES MAXIMUM 0.6505 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2041 AND INCHES MAXIMUM 0.2051 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 132000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.3025 AND INCHES MAXIMUM 0.3225 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 49.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1165-3-5R | 27624 |
| 12157-3-5R | 56878 |
| 121557-3-A5PX | 56878 |
| 12157-3-5R | 80539 |
| 121557-3-A5PX | 80539 |
| C7984-3-5R | 81755 |
| VT1693F3-5X | 92215 |
| VT1693F35-R | 92215 |
| H044-3-5R | 97928 |
| AIC984-3-5R | 06725 |
| AIC984-3-5PR | 06725 |
| VT1693F3-5X | 06950 |
| VT1693F35-R | 06950 |
| H044-3-5R | 17446 |
Supersedes
This item replaces cancelled NIIN 012964087. An older drawing citing one of those numbers resolves here.