NSN 5305-01-264-1477 · NIIN 012641477 · FSC 5305
NO DASHES 5305012641477
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.574 AND INCHES MAXIMUM 0.624 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.646 AND INCHES MAXIMUM 1.676 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.826 AND INCHES MAXIMUM 0.888 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.072 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0044-0717 | 23899 |
| LD111-0044-0717 | 27624 |
| LD111-0044-0717 | 43999 |
| LD111-0029-0717 | 43999 |
| LD111-0044-0717 | 56878 |
| LD111-0044-0717 | 57928 |
| LD111-0044-0717 | 73197 |
| LD111-0044-0717 | 80539 |
| LD111-0044-0717 | L4528 |
| LD111-0044-0717 | 06950 |
| LD111-0044-0717 | 06725 |
| LD111-0044-0717 | 17446 |
Supersedes
This item replaces cancelled NIIN 011708499. An older drawing citing one of those numbers resolves here.