NSN 5305-01-265-6116 · NIIN 012656116 · FSC 5305
NO DASHES 5305012656116
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.283 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.226 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.138 |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.111 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MAXIMUM 0.390 |
| CTHW | PRIMARY WASHER STYLE | |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES MAXIMUM 0.065 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 83920-96C-6 | 56878 |
| 934273 | 70276 |
| 2692015-1 | 96214 |