NSN 5305-01-266-8383 · NIIN 012668383 · FSC 5305
NO DASHES 5305012668383
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.482 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.170 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.634 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.312 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.688 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0044-2511 | 27624 |
| LD111-0044-2511 | 43999 |
| LD111-0044-2511 | 56878 |
| LD111-0044-2511 | 57928 |
| LD111-0044-2511 | 73197 |
| LD111-0044-2511 | 80539 |
| LD111-0044-2511 | L4528 |
| LD111-0044-2511 | 06725 |
| LD111-0044-2511 | 06950 |
| LD111-0044-2511 | 17446 |