NSN 5305-01-266-8394 · NIIN 012668394 · FSC 5305
NO DASHES 5305012668394
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.046 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B,THD HOLE 0.300 IN MIN,0.345 IN MAX DP,COUNTERBORE 0.145 IN. MIN,0.150 IN MAX DIA; INJECTION PORT 0.120 IN LG,0.060 IN WIDE IN UNTHD SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.180 IN |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 4928 OR ASSN STD 2ND MATERIAL RESPONSE A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4075V4-9-18 | 56878 |
| 11839V4-9-18 | 59563 |
| 3M1034V4-9-18 | 60516 |
| HT4075V4-9-18 | 73197 |
| 3M1034V4-9-18 | 76301 |
| 3M1034V4-9-18 | 80539 |
| HT4075V4-9-18 | 92215 |
| 3M1034V4-9-18 | 92215 |
| HT4075V4-9-18 | L4528 |
| HT4075V4-9-18 | 06950 |
| 3M1034V4-9-18 | 0PTK6 |