NSN 5305-01-271-5850 · NIIN 012715850 · FSC 5305
NO DASHES 5305012715850
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: 2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR); 3990-01-444-5196 CEMENT MIXER; RG-31 MRAP; MEDIUM MINE PROTECTED VEHICLE - MMPV
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS MINIMUM 21.5 |
| AASB | FASTENER LENGTH | MILLIMETERS MINIMUM 44.5 AND MILLIMETERS MAXIMUM 45.5 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | MILLIMETERS MAXIMUM 8.1 |
| AATB | WIDTH BETWEEN FLATS | MILLIMETERS MINIMUM 9.64 AND MILLIMETERS MAXIMUM 10.00 |
| AATC | EXTENDED WASHER DIAMETER | MILLIMETERS MAXIMUM 10.0 |
| AATD | EXTENDED WASHER THICKNESS | MILLIMETERS MINIMUM 1.2 |
| AGAV | END ITEM IDENTIFICATION | 2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR); 3990-01-444-5196 CEMENT MIXER; RG-31 MRAP; MEDIUM MINE PROTECTED VEHICLE - MMPV |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 8.0 |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.25 |
| CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G |
| MATT | MATERIAL | OVERALL STEEL PROPERTY CLASS 9.8 OR STEEL PROPERTY CLASS 10.9 OR STEEL PROPERTY CLASS 8.8 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE ZINC |
| THSD | THREAD SERIES DESIGNATOR | M |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 012805628. An older drawing citing one of those numbers resolves here.