NSN 5305-01-282-7494 · NIIN 012827494 · FSC 5305
NO DASHES 5305012827494
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.493 AND INCHES MAXIMUM 0.593 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.750 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.507 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| CYBA | SCREW SURFACE TREATMENT | ZINC |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE AST- B633 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 2S |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SURFACE TREATMENT |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS35190-289 | 80205 |
| FF-S-92 | 81348 |
| MS35190-289 | 96906 |