NSN 5305-01-312-5006 · NIIN 013125006 · FSC 5305
NO DASHES 5305013125006
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.258 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.468 AND INCHES MAXIMUM 0.498 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,CL2 TY2 |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 32.0 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1378-0004 | 27624 |
| LE111-0032-0004 | 43999 |
| SII-1087-0004 | 57928 |
| FIT111-0032-0004 | 58998 |
| LE111-0032-0004 | 60516 |
| MA2LE132-04-04 | 58245 |
| LE111-0032-0004 | 58845 |
| HR132-04T04 | 73197 |
| A033-0004 | 80539 |
| 1231A04T04-04 | 80539 |
| A032-0004 | 97928 |
| HR132-04T04 | L4528 |
| SCI785T-04-04 | 06950 |
| AIC4038-04-04 | 06725 |
| A032-0004 | 17446 |