NSN 5305-01-323-4154 · NIIN 013234154 · FSC 5305
NO DASHES 5305013234154
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.363 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.536 AND INCHES MAXIMUM 0.566 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.374 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.460 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2,CL 2 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AM2800C3D-3 | 1FY45 |
| GB511DU3C3D | 1FY45 |
| PBF1355C3-3D | 27624 |
| GB511DU | 26512 |
| GB511DU3C3D | 26512 |
| MATP111CD3-3 | 58845 |
| GB511DU3C3D | 58845 |
| HR217C3-3D | 73197 |
| GB511DU3C3D | 80539 |
| 122966CDH-3 | 80539 |
| HR217C3-3D | L4528 |