NSN 5305-01-324-8861 · NIIN 013248861 · FSC 5305
NO DASHES 5305013248861
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.406 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.141 AND INCHES MAXIMUM 1.171 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.2996 AND INCHES MAXIMUM 0.3016 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | CETYL ALCOHOL PER MIL-L-87132 TY 1,GR B |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1018-3-12F | 1EM77 |
| 3M939-3-12F | 1EM77 |
| WC939-3-12F | 60516 |
| 3M939-3-12F | 58998 |
| MA6939-3-12F | 58845 |
| ST3M939-3-12F | 58845 |
| HR248-3-12BJ | 73197 |
| 3M939-3-12F | 76301 |
| ST3M939-3-12F | 76301 |
| 124894-3-12F | 80539 |
| VT1730-3-12P | 92215 |
| HR248-3-12BJ | L4528 |
| AIC939-3-12P | 06725 |
| AIC1165-3-12P | 06725 |
| SC5087-3-12P | 06950 |
| AIC1147-3-12P | 06725 |
| 3M939-3-12F | 0ZC92 |