NSN 5305-01-325-5731 · NIIN 013255731 · FSC 5305
NO DASHES 5305013255731
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.206 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.516 AND INCHES MAXIMUM 1.546 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.2996 AND INCHES MAXIMUM 0.3016 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | CETYL ALCOHOL PER MIL-L-87132 TY 1,GR B |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M939-18F | 1EM77 |
| 3M939-18F | 1VSL7 |
| 3M939-3-18F | 56878 |
| 3M939-18F | 58998 |
| 3M939-18F | 60516 |
| 3M939-3-18F | 58845 |
| MA6939-3-18F | 58845 |
| HR248-3-18BJ | 73197 |
| 3M939-3-18F | 76301 |
| 1248-3-18F | 80539 |
| VT1730-3-18P | 92215 |
| HR248-3-18BJ | L4528 |
| AIC1165-2-18P | 06725 |
| SC5087-3-18P | 06950 |
| 3M939-18F | 0ZC92 |