NSN 5305-01-329-3993 · NIIN 013293993 · FSC 5305
NO DASHES 5305013293993
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; MRAP BUFFALO MK2A2
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 6G |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS MINIMUM 19.58 AND MILLIMETERS MAXIMUM 20.42 |
| AASB | FASTENER LENGTH | MILLIMETERS MINIMUM 19.58 AND MILLIMETERS MAXIMUM 20.42 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.6094 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 1.500 |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; MRAP BUFFALO MK2A2 |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 8.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 33.0 |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.25 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HH ADJ LK M8 X 20 |
| MATT | MATERIAL | OVERALL STEEL PROPERTY CLASS 10.9 |
| SFTT | SURFACE TREATMENT | OVERALL OIL |
| THSD | THREAD SERIES DESIGNATOR | M |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 015533086. An older drawing citing one of those numbers resolves here.