NSN 5305-01-329-9961 · NIIN 013299961 · FSC 5305
NO DASHES 5305013299961
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.968 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.031 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.120 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.314 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CYAU | SCREW MATERIAL | TITANIUM ALLOY UNS R56400 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 63.0 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 03A292-3-16 | 1W025 |
| FIT7946-3-16 | 58998 |
| 03A292-3-16 | 76823 |
| 111290-3-16 | 80539 |
| 3D0005-3-16 | 88277 |
| SC5084-3-16 | 06950 |
| SC5049-3-16 | 06950 |
| AIC4414-3-16 | 06725 |
| AIC4463-3-16 | 06725 |
| 111290-3-16 | 0PTK6 |