NSN 5305-01-351-5121 · NIIN 013515121 · FSC 5305
NO DASHES 5305013515121
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.438 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.111 AND INCHES MAXIMUM 1.141 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.4689 AND INCHES MAXIMUM 0.4739 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4041-5-11M7 | 56878 |
| 3M707-5-11-7-1 | 58998 |
| 11873-5-11-7-1 | 59563 |
| HT4041-5-11M7 | 58898 |
| HT4041-5-11M7 | 73197 |
| 3M707-5-11-7-1 | 76301 |
| HT4041-5-11M7 | 92215 |
| 3M707-5-11-7-1 | 92215 |
| HT4041-5-11M7 | 97928 |
| 10113721 | A486G |
| HT4041-5-11M7 | L4528 |
| HT4041-5-11M7 | 06950 |
| HT4041-5-11M7 | 17446 |