NSN 5305-01-381-5723 · NIIN 013815723 · FSC 5305
NO DASHES 5305013815723
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.848 AND INCHES MAXIMUM 2.878 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.449 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.428 AND INCHES MAXIMUM 2.448 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 03A174-4-39 | 1W025 |
| PBF1417-4-39 | 27624 |
| HR240-4-39 | 73197 |
| 03A174-4-39 | 76823 |
| 123743-4-39 | 80539 |
| T009-4-39 | 97928 |
| HR240-4-39 | L4528 |
| SC3102-4-39 | 06950 |
| AIC1652-4-39 | 06725 |
| 03A174-4-39 | 0JRC1 |
| SC3102-4-39 | 0PTK6 |
| SLB146-4-39 | 16258 |
| T009-4-39 | 17446 |