NSN 5305-01-394-5977 · NIIN 013945977 · FSC 5305
NO DASHES 5305013945977
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.460 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.070 AND INCHES MAXIMUM 1.200 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.395 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | GRIP INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.899 AND INCHES MAXIMUM 0.949 |
| FEAT | SPECIAL FEATURES | DOMED HEAD |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11909V4DL4M1 | 59563 |
| ST3M466V4DL4M1 | 73197 |
| ST3M466V4DL4M1 | 76301 |
| ST3M466V4DL4M1 | 80539 |
| HT4028L4D4M | 92215 |
| ST3M466V4DL4M1 | 92215 |
| ST3M466V4DL4M1 | L4528 |
| ST3M466V4DL4M1 | K5673 |
| HT4028L4D4M | 06950 |
| ST3M466V4DL4M1 | 17446 |