NSN 5305-01-412-5367 · NIIN 014125367 · FSC 5305
NO DASHES 5305014125367
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.397 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.320 AND INCHES MAXIMUM 1.350 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.464 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2646 AND INCHES MAXIMUM 0.2651 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.938 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | OVERSIZE GRIP DIA |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0045-2415 | 27624 |
| LD111-0045-2415 | 43999 |
| LD111-0045-2415 | 57928 |
| LD111-0045-2415 | 56878 |
| LD111-0045-2415 | 73197 |
| LD111-0045-2415 | 80539 |
| LD111-0045-2415 | 92215 |
| LD111-0045-2415 | L4528 |
| LD111-0045-2415 | 06725 |
| LD111-0045-2415 | 06710 |