NSN 5305-01-417-9050 · NIIN 014179050 · FSC 5305
NO DASHES 5305014179050
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.397 AND INCHES MAXIMUM 0.417 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.293 AND INCHES MAXIMUM 0.301 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.052 AND INCHES MAXIMUM 0.072 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 2200 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
30 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M1170D3-1 | 1EM77 |
| 3M1170D3-1 | 1VSL7 |
| TX1027D3-1A | 27624 |
| 3M1170D3-1 | 27624 |
| TX1027D3-1A | 56878 |
| 3M1170D3-1 | 56878 |
| 3M1170D3-1 | 59563 |
| 3M1170D3-1 | 58998 |
| 11825D3-1/11825D3-1A | 59563 |
| 3M1170D3-1 | 60516 |
| 11845D3-1/11845D3-1A | 59563 |
| TX1027D3-1A | 73197 |
| TX1027D3-1 | 73197 |
| 3M1170D3-1 | 73197 |
| 3M1170D3-1 | 76301 |
| 3M1170D3-1A | 76301 |
| TX1027D3-1A | 80539 |
| TX1027D3-1A | 92215 |
| 10328844 | A486G |
| TX1027D3-1A | C4293 |
| TX1027D3-1A | L4528 |
| 3M1170D3-1 | 06710 |
| TX1027D3-1 | 06725 |
| TX1027D3-1A | 06950 |
| TX1027D3-1A | 06725 |
| 3M1170D3-1 | 06725 |
| TX1027D3-1A | 0PTK6 |
| TX1027D3-1A | 0ZC92 |
| HP1170D3-1A | 0ZC92 |
| 3M1170D3-1 | 17446 |