NSN 5305-01-435-5528 · NIIN 014355528 · FSC 5305
NO DASHES 5305014355528
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.735 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.1575 AND INCHES MAXIMUM 2.1875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.927 AND INCHES MAXIMUM 1.019 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4985 AND INCHES MAXIMUM 0.4995 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.5000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.4275 AND INCHES MAXIMUM 1.4475 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416, TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30LU8-23 | 1RC86 |
| BACB30LU8-23 | 27624 |
| BACB30LU8-23 | 56878 |
| BACB30LU8-23 | 81205 |
| BACB30LU8-23 | 80539 |
| BACB30LU8-23 | 97928 |
| BACB30LU8-23 | 06950 |
| BACB30LU8-23 | 06725 |
| BACB30LU8-23 | 06710 |
| BACB30LU8-23 | 17943 |