NSN 5305-01-444-6212 · NIIN 014446212 · FSC 5305
NO DASHES 5305014446212
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Application: 5 VL MANIFOLD
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MAXIMUM 0.375 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.250 |
| AAUB | HOLE DIAMETER | INCHES MAXIMUM 0.050 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | 5 VL MANIFOLD |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASDB | WIDTH ACROSS FLATS | INCHES MAXIMUM 0.1900 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE FF-S-86 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AIA/NAS NASM 24674 PN MS24674 | 81349 |
| 300 SERIES PER FF-S-86 | 81349 |
| 1/4-20UNC-3A X 2 INCHES | 81349 |
| MS24674-30 | 96906 |
| S1E10042 ITEM 28 | 99517 |
| V3E10048 ITEM 28 | 99517 |
| S1E10042 ITEM 28L1 | 03950 |
| 1/4-20UNC-3A X 2 INCHESL1 | 03950 |
| AIA/NAS NASM 24674 PN MS24674L1 | 03950 |
| 300 SERIES PER FF-S-86L1 | 03950 |
| V3E10048 ITEM 28L1 | 03950 |
| MS24674-30L1 | 03950 |