NSN 5305-01-447-4359 · NIIN 014474359 · FSC 5305
NO DASHES 5305014474359
In Stock
SCREW,WOOD
Screws
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.910 AND INCHES MAXIMUM 4.000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.491 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | INCHES 0.242 |
| FEAT | SPECIAL FEATURES | HEAD STYLE:FLAT COUNTERSUNK NO. A199 FROM OLD FIIG A003A; NONMACHINE THREAD STYLE:GIMLET POINT NO. C13 FROM OLD FIIG A003A; INTERNAL DRIVE LOCATION:HEAD |
| MATT | MATERIAL | OVERALL STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110 OR STEEL COMP 1115 OR STEEL COMP 1116 OR STEEL COMP 1117 OR STEEL COMP 1118 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE AND ZINC AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 OR MIL SPEC 1ST TREATMENT RESPONSE -IL-C-81562,TYE 2,CLASS 3 OR ASSN STD 2ND TREATMENT RESPONSE AST- B633,TYE 2,CLASS 3 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-81562,TYE 2,CLASS 3 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 2C |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-111 | 81348 |
| FFS111 | 81348 |
| AN550-14R32 | 88044 |
| MS35494-123 | 96906 |
| MS35492-115 | 96906 |
Supersedes
This item replaces cancelled NIINs 001801601 · 005149567 · 011708468. An older drawing citing one of those numbers resolves here.