SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305014622754
Availability: LimitedAvailability

Screws

Application: F18 E/F

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.469
AASB	FASTENER LENGTH	INCHES MINIMUM 0.8915 AND INCHES MAXIMUM 0.9215
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.4645 AND INCHES MAXIMUM 0.4739
AAUH	SPLINE MINOR DIAMETER	INCHES MINIMUM 0.1570 AND INCHES MAXIMUM 0.1600
AAUJ	SPLINE MAJOR DIAMETER	INCHES MINIMUM 0.2195 AND INCHES MAXIMUM 0.2225
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120
AAWU	SINGLE SHEAR STRENGTH	POUNDS PER SQUARE INCH (PSI) 125000
ABQJ	POINT STYLE
ABQZ	INTERNAL DRIVE STYLE
AGAV	END ITEM IDENTIFICATION	F18 E/F
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.3125
ANEE	GRIP LENGTH	INCHES MINIMUM 0.4275 AND INCHES MAXIMUM 0.4475
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 5820
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRTL	CRITICALITY CODE JUSTIFICATION	AGAV
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS
FEAT	SPECIAL FEATURES	CHAMFERED END - CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED 2 THREAD PITCHES
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629, H13-8-O
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.