SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305014692871
Availability: LimitedAvailability

Screws

Application: F18 E/F

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	LEFT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116
AASB	FASTENER LENGTH	INCHES MINIMUM 1.160 AND INCHES MAXIMUM 1.190
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.358 AND INCHES MAXIMUM 0.365
AAUH	SPLINE MINOR DIAMETER	INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125
AAUJ	SPLINE MAJOR DIAMETER	INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495
AAWU	SINGLE SHEAR STRENGTH	POUNDS PER SQUARE INCH (PSI) 125000
ABQZ	INTERNAL DRIVE STYLE
AGAV	END ITEM IDENTIFICATION	F18 E/F
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.249
ANEE	GRIP LENGTH	INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 4400
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRTL	CRITICALITY CODE JUSTIFICATION	AGAV
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO(125 KSI SHEAR)
FEAT	SPECIAL FEATURES	CHAMFERED END - CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED 2 THREAD PITCHES
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.