NSN 5305-01-470-6044 · NIIN 014706044 · FSC 5305
NO DASHES 5305014706044
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: AIRCRAFT, F-16
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.363 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.785 AND INCHES MAXIMUM 0.815 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.258 AND INCHES MAXIMUM 0.305 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, F-16 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.437 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100" REDUCED HEAD, OFFSET CRUCIFORM, 132 KSI MIN SHEAR |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1009-3-7 | 1EM77 |
| 93926-3-7 | 56878 |
| 93926-3-7 | 80539 |
| C20645-3-7 | 81755 |
| 5305PL1876820 | 9009H |
| 5305PL0784959 | 9009H |
| AIC618-3-7 | 06725 |
| VT10021-3-7 | 06710 |
| 618-3-7 | 06725 |
| SF116-3-7 | 0K6Z0 |